Itsy Bitsy Blower
2" Square 12VDC Brushless 5500 Rpm Fan
- ITM#
Buy more and save!
| $3.92 | each when you buy 3 - 12 |
| $3.60 | each when you buy 13 or more |
Description
Itsy Bitsy Blower
This little black plastic fan and frame measures 2” square x 7/8” thick, and is a 12VDC 0.15 mA brushless model EFB0512HA. Has an air flow of 11.40cfm, and spins at 5500rpm. Able to operate from -10 to 70 degrees Celsius. Has a pair of 6” long red/black leads with a quick-disconnect.
Related Products
Related Products
12VDC MABUCHI MOTOR 5700 RPM
This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a...
$3.50
SALE
12VDC 4-3/4" TAKEOUT MUFFIN FANS 1" PKG(5)
Come on sing it. Do you know the muffin fan, the muffin fan, the muffin fan… These are 12VDC 4-3/4” x 1” take out muffin fans. All working, all have short leads, some dusty and some not so dusty...
$8.50
$10.00
15% OFF
12VDC MICRO SOLENOIDS
We find ourselves in possession of a bunch of 10- microsolenoid switches from the Lee Company. They’re rated for 12VDC and 5 psid, probably between 250-500mA, mounted in a 2-1/2” x 2” x 7/8” metal...
$24.50
13,000 RPM 6VDC MOTOR PKG(2)
This 3-6VDC motor operates optimally at 6VDC, draws 450mA no load, stalls at approx 2.4A and spins at about 13K rpm. Measures 2" long x 1-1/16" dia with a little 3/8" dia x 5/16" 12-tooth gear...
$4.96
12VDC MABUCHI AIR PUMP
This little L-shaped low-pressure piston-and-diaphragm air pump has a 7/32" OD inlet and an 11/32” OD x 9/32” ID outlet, and is attached to a Mabuchi RK-555PH 12VDC motor that draws 100mA no load,...
$9.50
SALE
COMPACT 12VDC AIR COMPRESSOR
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i...
$15.00
$21.95
32% OFF
3-PHASE BRUSHLESS SERVO MOTOR
This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a...
$2.75