Mounts, Hangers & Knobs

Nite Ize®, the company that makes this ingenious little fella, calls it the S-Biner. We’ve been thinking for the past 30 seconds, and we’ve decided that’s about as good a name as Carabiner-Carabiner, which we came up with ourselves...

Hang your bicycle in style. Keep it out of the way but also out of the closet with these Heavy Duty Bike Storage Hooks. The classic 5” storage hooks screw into the wall or ceiling (1-1/2” of their 5” is screw), and of course...

Skivvy-sewing lessons? Nah, just go commando. But if you want to make your own drawers, as in places to keep stuff, try these small drawer slides. Measure 7” long, and extend to approx 12”. Drilled with a plethora of holes to screw them to...

Now you can have a good, strong hook without drilling any holes. This plated magnetic hook sticks to any ferrous metal surface via a 2" dia alnico magnet with a 10-12 pound pull. Handy gadget to hold a tool, towel, broom or key ring (and if the ring is...

Solid, durable and strong for its size, this 3/4" single, fixed-loop pulley has a brass wheel and a 1/4" dia loop for hanging. Measures 1-3/4" overall with a 25-lb max load. Don’t use it for lifting anything overhead, but if you have some...

Hang it all with this set of (10) magnetic hooks. The 1-3/16" long x 9/64" hooks screw into 1-3/8" dia magnetic bases with an approx 8-lb pull, which is heavier than most jackets and keys. Good for horizontal or vertical mounts, and dandy for adding...

Like your cousin the state senator, this N42 neodymium magnet has a lot of pull—an estimated 90 lbs on flat steel surfaces. Ideal for holding, hanging and retrieving objects. Measures approx 1-1/4” dia x 1/4” thick with an M6 eyebolt...

You hear that? Like a deeply satisfying metallic clink? That’s the sound of a powerful round mounting magnet with a hole in the center uniting with the metal surface of your choice. The magnet is 1-1/4" dia x 1/4" thick and the hole is tight, about...

Hey, we’re here to help, as always. Try this 3/4” metal, swivel-eye, single-sheeve pulley for 1/8” ropes. From KingChain®, this powerful little workhorse has an 88-lb pull. Great for projects on the lighter side, DIY construction,...

Actually, brace something that you’re building or reinforcing with these sturdy National Hardware™ flat corner braces with included mounting screws. You pick: the (4) brass, 1-1/2" x 3/8", (4)-hole L-shapes; the (4)...

Pictures crooked? This Professional Picture Hanging Home Toolbox Kit has been “used by museums and art galleries since 1964,” according to the box. Before that, museums and galleries must have used a different kit. Either way, this is...

We’re into hygiene around here (it’s the Science in us), and if we didn’t already have foot grabs on our restroom doors, we’d be installing these in a hot second. They look like little soap dishes, with up-pointing serrated edges...

This String Light Suspension Kit from Outback Social allows you to turn your back yard, basement or barn into an enchanted wonderland of luminosity. In other words, with this kit, you can string up a bunch of little lights. You’ll get 164 feet of...

These standard pegboard hooks fit, wait for it, standard pegboards, with 1” spacing on the legs, and made of 7/32” steel. Not really hooks, these are the long straight thingies with a slight upward angle to approx the...

If you’re looking for tape to help you get up on a horse, you’ve come to the wrong place. If you want to wall-mount some pictures, hey, we’ve got you covered! Our 3/4” wide x 2mm thick foam mounting tape is sticky on both sides,...

A rubber grommet, 7/8" dia x 11/16" thick, with a brass insert that forms a flange over one face and lines about 3/4" of the length of the 1/4" dia bore. Use it as a grommet, a shock mount, or both. With  a brass wire hanger...

Brass L-shaped shoulder hooks (Why aren’t they elbow hooks?) are handy to have around. Each has a thread about half as long as the hook itself, and a small plate that fits against the wall. You get (2) packages, for a total...

1-7/8" dia. brown and orange hard plastic balls with a 1-1/4" ID x 1-1/2" deep hole on one side. Use them as slippery chair feet, as knobs on the ends of levers or tops of canes or even as protective caps for sharp pole ends. The tapered inner veins will...

The kind that you hammer into the ground for to hold up your tent. Make that shelter-half, because these are from Uncle. Measure 12" long x 1-3/4" wide in a V-shape, in olive drab steel with a 1/4” bore for your rope, and shoulders to wrap the rope...