DRIVES & WHEELS
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PLASTIC GEAR SET WITH BUSHINGS
Gear Up Or gear down-for the science fair or for any number of hobby projects. This hard-to-find set of (3) combination spur/beveled gears-for when you want gears set either straight or at 90° to one another-also has one small spur gear, plus three...Starting at $1.95Starting at $1.95 -
LAZY SUSAN TURNTABLE BEARING, 4"
LAZY SCOTT BEARINGS Never seemed fair to nail the "lazy" tag so permanently on the "Susans" but that probably has no "bearing" on the issue. Also called turntable bearings, they are the square or circular flat ball bearing...Starting at $4.35Starting at $4.35 -
WHEEL, 3-5/8" DIA X 1-1/4", 5/16" ID
Plastic utility wheel. 3-1/2" diameter x 1-1-4" wide and a 5/16" hub. Ribbed tread. Weighs in at 1/2 lbs.$1.25$1.25 -
3-WHEEL DOLLY 110-LB LOAD CAPACITY
Good-bye backaches. Save your sacroiliac with a 3-wheeled professional mover's dolly. It measures 6-3/8" wide between a trio of swivel casters with 1-9/16" x 11/16" wheels, and has a drop-down center and a 1/2" dia hole for permanent attachment to...$7.50$7.50 -
CASTERS, 2" BAG OF 4 PLASTIC SWIVE BASE
This item is straight from Central Casting, a bag of (4) black office-chair casters. Each caster has (2) spinning wheels and swivels 360 degrees, with a locking mechanism that’s especially handy if your office is on a yacht. Wheels are just under...$4.50$4.50 -
SMALL SWIVEL PLATE CASTERS PKG(4)
These small swivel plate casters have dual 1-3/8” dia plastic wheels on coincidentally 1-3/8” square mounting plates with (4) holes. Measure just under 2” tall and are screaming to be used to make rolling plant holders, because nothing...$2.95$2.95 -
SINGLE SHEAVE PULLEY 1-7/8"
PULL, PULL, PULL YOUR BOAT A nice pulley just ready to be combined into the block and tackle you need for tiny jobs, like trimming your bonsai trees or hauling your model boat out of the pond. Get this block with (1) sheave and rig...$1.35$1.35 -
5/8" PILLOW BLOCK BEARING WITH FITTINGS
Pillow Blocks These pillow block bearings have 13-gauge steel mounting straps, 4" long x 1-1/8" with 5/16" x 5/8" mounting slots, and a sintered iron ball unit measuring 1-11/16" dia with either a 5/8” ID or 1” ID brass...Starting at $4.95Starting at $4.95 -
11-1/2" DIAMETER PLASTIC WHEEL
This 11-1/2" dia x 1-3/4" width wheel is so nice it makes us wish we had a wagon to attach it to. Wheel itself has black tread that extends 3/4” beyond the wheel. The rim, which fits on a 1/2” axel, is white with three swirling spokes. Both...$7.50$7.50 -
WHEEL, 3" DIA. X 1-1/4" RED POLYURETHANE 3/8" ID
Red Polyurethane ball bearing wheel. 3" diameter, 1-1/4" wide with a 3/8" bore. Load rating is 180 lbs and weighs 1/2 lbs.$2.95$2.95 -
WHEEL, 2-1/2" DIA. X 7/8" VIPER SCOOTER, 1/4" ID
Shepherd oil resistant rubber Viper scooter wheel. 2-1/2" diameter x 7/8" wide with a 1/4" id hub. Max load per wheel is 80 lbs. Weighs in at 1/2 lbs.$1.25$1.25 -
LED ILLUMINATED TRAINING WHEELS
We generally say “no” to training wheels (salt and lime slows us down), but these snazzy red training wheels are the real deal with multi-colored LED lights embedded inside. You ride, they light up. It’s like learning to ride and doing...$9.50$9.50 -
PILLOW BLOCK BEARING 3-1/4" X 2-3/4" 1" ID
Just a real soft name for a hunk of cast iron that holds a sealed bearing. This one measures 3-1/4" wide x 2-3/4" tall x 1-3/4" with a pair of 3/8" mounting holes in the bottom and a 1-15/16" sealed bearing with a 1" ID x 1-3/8" dia x 1-11/32" long...$8.95$8.95 -
8" TRAILER TIRE INNER TUBE BLACK RUBBER
Just 8” in dia, this heavy-duty inner tube is for trailers that carry off-road vehicles, snowmobiles, motorcycles and heavy equipment. Model #AE29978G for 400/480-8 tires, with a straight valve stem. Also handy if your Shih Tzu likes to go tubing...$7.50$7.50 -
WHEEL, 6" DIA. X 2", 1-3/16" ID RUBBER COATED
Black Rubber Wheel 6" diameter, 2" wide with 1-3/16" hub. Load is 400 lbs. No bearing hub. Weighs 4 lbs.$3.75$3.75 -
STEEL PULLEY WITH 1/2" ID SHEAVE
Steel. Not used but a little rusty from storage. Handy. Measures 3-1/2" dia with a single 1/2” ID sheave with a 2-1/8" x 1-5/8" dia hub and a keyed 1” ID bore. Drilled for a 1/4” - 16 setscrew (not included). Made in the USA.$1.25$1.25 -
WHITE SILICONE BELTS 4" X 3/32" PKG(25)
These translucent silicone O-rings are 3/32" thick and measure 4" dia. Nice belts for science-project motors and even nicer for our slingshot needs. Crafters will see jewelry material that the metal-detectors won't care about.$4.95$4.95 -
1-1/16" LONG 24 TOOTH PULLEY PKG(3)
This small 24-tooth pulley is 1-1/16" long with 5/16" of that being a 5/8" dia shaft with a 1/2" x 3/8" flattened bore. The pulley portion is 1" OD x 7/8" ID. In shiny silver aluminum.$3.95$3.95 -
MEDIUM SKATEBOARD BUSHING PKG(25)
SKATEBOARD BUSHED? That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Our middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper.Starting at $3.25Starting at $3.25 -
BEARING, 23mm X 8mm X 14mm Sealed PKG(3)
GET YOUR BEARINGS Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!. Click on the bearing name to see a large photo of your favorite.Starting at $3.95Starting at $3.95 -
1-1/2" SHIELDED BOOTED BEARING
Bearings In Sleeves And Boots You pick: the sleeved bearing, sometimes listed as a "special agricultural bearing," is a single race radial bearing, 1-9/16" OD x 5/8" ID x 3/4" with a black plastic sleeve surrounding it, measuring...Starting at $2.75Starting at $2.75 -
SINGLE-GROOVE DRIVE PULLEY
Our new single-groove drive pulley measures 5-1/2” OD. Has a 1-1/8” bore with a 1/4” keyway not drilled for a set screw. Made for belt type A (1/2”). The length through the bore is 1-7/8” and the hub is offset 1/2”...$3.85$3.85 -
80MM ROLLER THRUST BEARING
Biggest industrial bearing we’ve seen in a dog’s age, and we’ve got some old industrial dogs around here. This shielded, single-direction roller thrust bearing is 80mm OD x 30mm ID x 36mm thick. Unique bore. Will fit either 30mm square...$7.50$7.50 -
CONCENTRIC SEALED BEARING
Interesting concentric sealed bearing, like a pillow block, from Hub City. The outer portion measures 52mm dia x 15mm thick with an anti-rotation pin, and the inner measures 34mm dia x 12mm thick with a 22mm ID bore and (2) 3mm setscrews.$4.50$4.50 -
1-1/16" DIAMETER 32 TOOTH GEAR PKG(4)
Nylon, With Teeth This 32-tooth gear is 1-1/16" dia, 32 pitch and 20-degree pressure angle. Measures 3/32" thick on its face with a 1/4" bore and a 15/32" dia x 17/32" long 13-tooth shaft with the same pitch/pressureStarting at $2.95Starting at $2.95