MOTORS, BLOWERS & PUMPS
- 110/120 VAC MOTORS
- 12-24 VDC MOTORS
- 6-12 VDC Motors
- 6VDC Motors and Under
- Blowers
- Other AC Motors
- Other DC Motors
- PUMPS
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
SALE
CAR SEAT 12VDC GEAR MOTOR
These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is...$10.00$14.7532% OFF$10.00$14.7532% OFF -
12VDC MINI DIAPHRAGM AIR PUMP
Great little 12VDC oil-less diaphragm style air pump. For you techies out there it draws 40-300mA, 2.0 Litres/min, 350mm Hg max pressure. These are takeouts and in great condition but the leads on yours may vary in length or even be clipped off (Just...$3.50$3.50 -
12VDC DUAL PORT ON DEMAND WATER PUMP 1 GPM 10AMP
it's Shower Time New surplus is the best! This Maric, Made in USA 12VDC Demand/Delivery pump is typically used to pump water on-demand (duh) in an instant when power is applied to the two 8" red/black leads. Think shower/faucet on a boat or an RV coming...$49.50$49.50 -
12VDC MABUCHI MOTOR 5700 RPM
This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a setscrew-mounted coupler that resembles a router bit. Has...$3.50$3.50 -
SALE
1.5-12 VDC 75PRM REVERSIBLE GEAR MOTOR
1-1/2-9 VDC Gear Motor with a right angle gearbox and a 5/16" shaft. Shaft comes out of gear box back towards the motor. Overall size is 3" X 3-1/2" X 2-1/2" and weighs in at just over 1/2lb. Draws 250mA no load and 750mA full load. This bugger is one of...$5.00$9.5047% OFF$5.00$9.5047% OFF -
SALE
50MM MUFFIN FAN 6-18VDC BONANZA! PKG(10)
10 Fer $10 It's a head-spinning 10-Fer! Ten fans for ten bucks! These cute little 2" square 50mm muffin fans by Runda operate from 6-18VDC, and they’re rated at 18 Volts. They’re pretty gusty at 12VDC and run strong off a single 9-Volt...$8.00$10.0020% OFF$8.00$10.0020% OFF -
1-1/2 - 3VDC HOBBY MOTOR
This little 1.5-3VDC motor draws just 15mA no load, which means it's just the ticket for solar-cell applications. At 3VDC it spins approx 600 rpm and stalls at 125mA. Measures 1-1/8" long x 15/16" dia with a 5/16" long x 1/16" dia shaft and 3-1/2" leads.$3.35$3.35 -
COMPACT 12VDC AIR COMPRESSOR
Nifty device that takes maxi air and squeezes it down into a mini condition. The device is roughly 6-1/2"" long x 6" tall x 4" wide. It has a 10 ft. cord that plugs into an auto lighter socket: i.e. it runs on 12VDC @ 10 amps. Air output is via a 12"...$21.95$21.95 -
BATTERY OPERATED 3-GEAR DISPLAY MOTOR
Nifty little display motor has (3) gears operating a 7-5/8” long pivoting plastic arm that swings to and fro a tad faster than twice a second. Mounted in a 4-3/4” x 3-5/8” x 1-7/8” white plastic box. All you add is a (1) D-cell...$8.75$8.75 -
120VAC 20 GPM SUBMERSIBLE WATER PUMP
This 20 GPM (gallons per minute) submersible fluid pump will shoot fluid approx (15) feet upward. Fits standard garden hose, Comes with (4) rubber feet and It even includes a brass barbed hose connector for 8mm hoses etc. Unit measures 7" x 5-1/4" x 4"...$29.50$29.50 -
12-24VDC GEAR MOTOR W/PULLEY
Attention robotics boffins: Here's a nice, powerful 12-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty. Has...$14.75$14.75 -
SUBMERSIBLE WATER PUMP FOR YOUR DIY FOUNTAIN
Submersible Pumps Here are the ins and outs of submersible pumps for your DIY fountain.These small electric pumps run on 24 VAC (For low energy consumption.) from the included wall outlet adapter, are rated for continuous duty,...Starting at $14.95Starting at $14.95 -
12VDC KOGE DIAPHRAM AIR PUMP 3/L MINUTE
From Koge Micro Pump Co. (company motto: Let’s PUMP the World!), this nice little diaphragm air pump draws approx 400mA at 12VDC and will put out 3 liters a minute with a minimum pressure of 400mm/Hg. Measures 2-3/4” long x 1-1/4”...$5.75$5.75 -
9VDC PISTON STYLE MOTOR ASSEMBLY FROM BREAST PUMP
Pistons Are A Pumpin' It's a beauty folks. These are pretty clean take-outs from what we have been told is a breast pump assemply. They operate from 3VDC up to 12VDC, but that won't matter because we are going to include the wall adapter. (9VDC@2Amps)...$14.50$14.50 -
3-12VDC TOY CAR GEAR MOTOR
Don’t get too excited--we don’t have Tesla parts. But we do have this honey of a reversible 12VDC gear motor from a kid’s ride-able toy car. Spins approx 75 rpm, draws 800mA no load and stalls at 11.5A via a 1/4” dia gear that...$14.50$14.50 -
110VAC MUFFIN FAN, 23CFM, 160mA, 3-3/16" X 1",
Have You Seen The Muffin Man? Muffin fans, pay attention. You pick the "nice" 110 VAC 21W fan from Thermocool, measuring 4-3/4" square x 1-1/2" thick with an unwired offset two-pin power connector, rated for 82-95 cfm and...Starting at $11.95Starting at $11.95 -
115VAC TIMING MOTOR 50 RPH TEAR DROP
This 115VAC, 50 RPH synchronous timing motor is teardrop-shaped and made for timing displays, sign animation and experimental purposes. Continuous duty and counter-clockwise direction. Measures 2-1/2" x 2" x 1-7/8" with a 0.217" dia (just under...$3.95$3.95 -
4.8VDC VACUUM, 2.6L/MIN PUMP (B)
This vacuum pump from Koge Electronics draws 100-250mA at 4.8V and is rated for >2.6L/minimum output and -460mbar of pressure. Measures 2-9/16" x 1-3/16" x 1-5/16" with a 3/16" OD x 3/8" inlet barb and a 3/16" OD x 1/2" tall outlet...$6.50$6.50 -
12VDC 4-3/4" TAKEOUT MUFFIN FANS 1" PKG(5)
Come on sing it. Do you know the muffin fan, the muffin fan, the muffin fan… These are 12VDC 4-3/4” x 1” take out muffin fans. All working, all have short leads, some dusty and some not so dusty. School project? Perfect! Art student?...$10.00$10.00 -
2" SQUARE 12VDC BRUSHLESS 5500 RPM FAN
This little black plastic fan and frame measures 2” square x 7/8” thick, and is a 12VDC 0.15 mA brushless model EFB0512HA. Has an air flow of 11.40cfm, and spins at 5500rpm. Able to operate from -10 to 70 degrees Celsius. Has a pair of...$4.50$4.50 -
24VDC HENNKWELL BALL BEARING MOTOR
Even this 7/8" x 2-1/8" Hennkwell ball bearing reversible gear motor is ball bearings. Fletch could have told you that. Operates from 6-24VDC (optimal being 24VDC, turning at 142 rpm). Item number PZ22GR9120R-084BBH. Has a (2)-shafted front shaft (6mm...$14.50$14.50 -
9 VDC AIR PUMP MOTOR PISTON STYLE
This silver 9VDC air pump with a clear pumping assembly is 3-1/2" x 2” x 3” with a piston behind the clear plastic on one end. Both the 7/16” intake and ¼” output are on one side of the assembly. We couldn't find exact info...$5.75$5.75 -
11VAC 3W CCW TIMING MOTOR
It's All In The Timing These small timing motors draw 3W and are just under 2" dia x approx 3/4" thick with mounting wings that have (3) 1/8" holes. You pick: the 11VAC motor that spins 1 rpm CCW with a 3/4" long shaft with an...Starting at $3.50Starting at $3.50 -
75 RPM 9VDC GEAR MOTOR WITH WALL ADAPTER
Jackpot! A match made in heaven. We’ve combined our strongest little gear motor with its matching wall adapter for all your DIY needs.$12.50$12.50 -
12-24VDC 1800RPM MOUNTLESS MOTOR PKG(2)
Our motorman, CJ, called this reversible 12-24VDC motor strange, mostly because it has the power contacts mounted on the face, bracketing the 11/16" x 1/8" mostly striated shaft, and has no mounting brackets. But that shouldn't stop a clever person like...$5.95$5.95 -
SQUIRREL CAGE BLOWER MOTOR ASSEMBLIES 120VAC
When you need a little gust, or maybe even a big gust, we have the blower for you. 115VAC squirrel cage blower motor assembly. It's 7-1/2" in diameter x 3" cage and 4-1/4" deep overall. These are takeouts from an airconditioner unit but in great shape as...$12.50$12.50 -
3-9VDC MOTOR WITH PISTON ON A CAM
This 3-9VDC 3-1/2” long cylindrical style motor was once going to be an airpump. Open on one end has a piston style action coming off the shaft side with cam and piston attached. Overall it measures 3-1/2” x 2-3/4” x 2”. Has two...$4.50$4.50 -
115VAC TAKE-OUT FAN MOTOR 1400RPM
Because it’s a new take-out fan motor from Welling Service Co., made for air conditioner-humidifiers. Rated for 115VAC, 16W, spins approx 1400 rpm via a 2-1/2” x 5/16” threaded shaft which will most likely have a nut on the end. Has...$8.75$8.75 -
SMALL 3-6VDC SCIENCE FAIR MOTOR PKG(2)
Mini Motors This small 3-6VDC motor draws 25mA, spins at 1100 rpm no load and stalls at 250mA. It's 2-3/8" long x 5/8" dia with a 3/16" dia x 1/4" 10-tooth sprocket. You can easily remove the sprocket if you just want to use the 5/16" dia x 1/16" shaft...$3.50$3.50 -
24VDC 24RPM GEAR MOTOR 15RPM
…with this nice little gear motor. Nominally rated for 24VDC and draws .2A with no load, this motor spins clockwise at 24RPM. The motor measures 2” X 1-1/8” and comes on a mounting bracket, but that’s removable. Shaft size is...$9.50$9.50 -
115VAC SQUIRREL CAGE FAN ASSEMBLY
This approx 15” long squirrel cage blower assembly operates at 115VAC, draws 20 watts and rotates at a gutsy 1500 rpm. Requires a 3uF start capacitor (not included). Squirrel cage is 10-5/8" long x 4-3/8" with a 3-5/8” x 4-3/8” motor...$14.50$14.50 -
FAN BLADE, 4", 4-BLADE, BLACK PLASTIC 3/16"
WE HAVE SO MANY FANS And even more fan blades. Black-plastic 4-bladed impeller, each measuring approx 4" across with a 3/16" bore. Designed for clockwise rotation. No motor. Just blades. (But nice little blades.)Starting at $1.25Starting at $1.25 -
12VDC MABUCHI AIR PUMP
This little L-shaped low-pressure piston-and-diaphragm air pump has a 7/32" OD inlet and an 11/32” OD x 9/32” ID outlet, and is attached to a Mabuchi RK-555PH 12VDC motor that draws 100mA no load, stalls at 4.3A, and spins approx 3500 RPM...$9.50$9.50 -
115VAC BLADE AND SQUIRREL-CAGE FAN
This takeout fan from an un-used AC unit draws 42W at 115VAC and spins both a 12” dia, 5-blade fan blade and a 7-1/2” x 2-3/8” squirrel cage at approx 900 rpm. The motor in the middle measures 3-3/4” dia x 3-1/2” with a...$19.50$19.50 -
3-PHASE BRUSHLESS SERVO MOTOR
The 3 Phases This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a...$2.75$2.75 -
SWISS-AIR(TM) TAKE OUT MOTOR WITH MOTION SENSOR
A Breath Of Fresh Air That’s us, a breath of fresh air in the shopping atmosphere. Also, your source for these surplus Swiss-Air™ II Freshener Systems--one with a motion activator, and one without (you pick). Originally...Starting at $3.95Starting at $3.95 -
PUMP ASSEMBLY, 4.4VDC 275mA W/STEPPER, SENSORS
We’re guessing it’s from a medical device, but we know for sure that it’s a pump assembly from The Lee Company of Connecticut. Looks expensive, like it should cost more than ten times our price, and that’s why you shop here. Has a...$12.50$12.50 -
230VAC TIMING MOTOR, 2 RPM
TIMING MOTORS These are really geared reduction motors, but much smaller and of lower power. Often used to operate cams and switches in electrical circuits, or to drive displays, they can generally be operated in continuous...Starting at $2.75Starting at $2.75 -
13,000 RPM 6VDC MOTOR PKG(2)
This 3-6VDC motor operates optimally at 6VDC, draws 450mA no load, stalls at approx 2.4A and spins at about 13K rpm. Measures 2" long x 1-1/16" dia with a little 3/8" dia x 5/16" 12-tooth gear. Simple +/- leads are wired to a double jack that can easily...$4.96$4.96