Rotary & Dremel Tools

You need this. Anybody who's ever made a third trip to the hardware store on the same day needs this. The (100) -- count 'em, (100) -- chrome vanadium driver and bit attachments and (4) different driver adapters (one of which, a super-cute cup-hook...

With a wide bit! This 16" long, 1" wide drill spade bit is for wood, and it’ll make a precise 1” dia hole. For use with any standard 1/4" power drill. It’s nice and sharp, ready to go. It’s so cool-looking, we wish we had a...

That’s right—you’ll get the whole set of hole saws, all (12) of them, plus a hard-plastic case to store them in! Saws measure 3/4", 7/8", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3", 3-1/2", 4", 5". You’ll also get (2) arbor...

For bigger, or longer, projects, and hands-free operation. This 1/4-hp flex-shaft grinder has a 42" long (counting the chuck) flexible shaft, a keyed chuck that accepts bits up to 5/32", a variable-speed control foot-pedal power switch, and a comfortable...

A great hand held rotary tool and an excellent buy. The plastic carrying case at 12" x 8-1/2" x 3-1/2" contains not only the 120VAC-powered variable speed (8,000-30,000 rpm) mini drill/grinder, but a 3-ft flexible extension shaft that allows you to...

Screw around corners or practice your close-order drilling with this right angle chuck adapter for an electric drill. Ratio is 1:1, so the speed matches your drill speed. Has a 3/8” x 1” shank, and a keyless chuck that can be adapted from...

And we do mean micro. Sizes #61 to #80 (yes, that is twenty different bits) which are from 0.013 to 0.038 inches diameter!! The big boys sell a set of similar bits (carbon steel, like ours) for about $30.00!! We like our prices better. Jarvis Says: Need...

Each of the (6) diamond-coated carbon-steel bits in this set has a 1/8” shank for use in rotary tools. All of them are 1-3/4” long and include: a ball, cylinder, two sizes of cones, a spindle, and a point.

What do rotary tools have in common with fashionistas? Yes, it really is all about accessorizing. This set includes (20) shading bands, (10) fiberglass cut-off wheels, (21) assorted grinding stones, (3) polishing wheels, (45) woolen wheels and points,...

All together now, boys and girls, can you say BARGAIN? A bonanza assortment of (100) 1/8" shank rotary tool attachments: wheels, brushes, stones, sanding wheels, buffing pads, and sundry other stuff. All in a nice wooden box with the latch on upside...

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in...

A really small guy who lives....Whoops! Wrong Chuck. This one is a drill or rotary tool chuck with a 1/8" shank and fits bit sizes #60-#80 to facilitate handling tools with truly small shanks. Very handy in the modeling and electronics worlds. Jarvis...