Robot Parts

These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is...

Bocatech 80 Amp DC Max. Panel mount meter.

It's was an itsy-bitsy teeny-weenie little Double Pole Double Throw black toggle slider switch. Or, rather it is one. Rated for DC Voltage but with little to no specifications beyond that. We'd probably keep it low wattage just to play it safe. Think:...

We're big fans of Rocker Moms here... and we're not talking high waist jeans, leather jackets, and bleach blonde hair. No, Rocker as in the action of the MOMentary switch. No offense to all the rocker moms out there, you're pretty cool too. From McGill...

This bipolar, 2-phase stepper motor from Shinano Kenshi Corp (SKC) draws 500mA at 9VDC with a 0.9 deg./step. Coils are brown/orange and red/yellow. Measures 1-7/16" dia x 1/2" with a 4" long, 3/8" threaded shaft, and mounting wings with 1/8" holes.

These momentary SPST push-button switches are normally open and measure 11/16" dia x just over 3/16" thick and have a 15/32" shaft with a steel lock-washer & nut plus a pair of 1/8" solder terminals on the bottom. Rated 3A at...

Now you can have a Minigrabber without even doubling up on the cheese and bacon dip at the Superfans tailgater. This Elenco® TL-9 Minigrabber to Minigrabber is a 36" long wire with 2-1/8” long ends designed to clip onto small-gauge wires for...

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are...

Little takeout 3-6VDC Mabuchi motors (6VDC nominal) spin approx 4000 rpm and draw 50mA no load. Stall at 300mA and measure 1-1/2" long x 1-1/16" dia with a 1/2” long x 3/32” dia shaft with a 2-sheave 9/16” dia pulley. Sheaves are...

An easy way to light up the kids' eyes! Teach them to wire a simple circuit with our basic components. The knife switches are mounted on a plastic bases. The miniature plastic socket holds a standard flashlight bulb with a 14 mm dia screw base. We pack 6...

Jackpot! A match made in heaven. We’ve combined our strongest little gear motor with its matching wall adapter for all your DIY needs.

This 3-6VDC motor operates optimally at 6VDC, draws 450mA no load, stalls at approx 2.4A and spins at about 13K rpm. Measures 2" long x 1-1/16" dia with a little 3/8" dia x 5/16" 12-tooth gear. Simple +/- leads are wired to a double jack that can easily...

In the universe of reed switches, we're assured that this one is quite snazzy. In a 1" x 9/16" x 3/8" housing with a  3/8" mounting wing with (2) 3/32" mounting holes. Trigger distance is approx 1" regardless of magnet strength. Comes with 20"...

Ten electrical leads with an alligator clip on each end. Each lead is about 14" long, not counting the 'gators. Vinyl coated 28 ga. wire with a vinyl cover over each clip. They come in an assortment of five colors with two leads in each color. The...

Our each is a dozen nickel-plated 2” long steel alligator clips with PVC sleeves but no boots because they’re made for electrical testing or soldering. You’ll get (6) each with red and black sleeves.

This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a setscrew-mounted coupler that resembles a router bit. Has...

You Say Breadboard… The manufacturer, Elenco Electronics, says Bredblox, but what's in a name? This is just a nice little breadboard for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16"...

Remember those old school vibration football games, or those fantastic days-of-yore vibrating beds in roadside motels? This is like that, just sized to today's pocket-held devices. It's a very small vibration motor (10mm dia x 2.5mm) that produces a...

Itty bitty Edison style 1/4 Watt lamp with a 3/16"/5mm screw base. (type E5 or E5.5) 1/2" long overall it needs 160ma @ 2.5 V. It has a clear glass envelope that collimates the light at the end for greater intensity when viewed end on. Typically priced...

Perhaps a switch in time won't save nine, but if you keep getting caught without the goods, and have to rush off to the local high priced supplier, we can help. Of our assortment of (10) switches, (at least (5) different) should have the answer to a...

And hey there, missus, too. This wired thermistor is a take-out from unused humidifier equipment. Has 10K Ohm resistance, which goes down as the temp goes up. Includes leads, length will vary, and measures 1-3/16” long x 1/4” dia thermistor.