12-24 VDC MOTORS

SUN-DENSHI SIREN MOTOR 12 VOLT DC Unit is in good physical condition, unit has been tested. 1.6 A draw. Intermittent duty. Message us with any questions, we are happy to help!

JENSEN CO. MODEL 1955 REVERSIBLE 12 VDC MOTOR Motor has been tested and is in working order. Manufactured circa 1986. 3/8" shaft with flattened offset. Unknown RPM. Message or call us with any questions, we are happy to help! 

We found this nice 12VDC 25W blower motor and we thought you should know about it since you’re into that kind of thing. Originally, it spun in a CPAP machine, but you can think of a dozen other uses, even as you read this. Has a very handy Molex...

These brand-spanking new 12VDC motors are made to move automobile seats but are willing to change. They spin at approx 190 rpm, draw 1.5A no load, and stall at approx 25A. Threaded shaft is at a right angle and is 4-1/8" x 7/16". Shaft thread is...

This little solenoid air valve requires 220mA at 24VDC and is normally closed. Working pressure is 6 psi. The inlet and outlet are 3/16" OD x 3/32" ID x 1/4" long at right angles to each other. Comes with 6" leads with a Molex connector. Part #AJK-F0507.

This 12VDC low-pressure, piston-driven, diaphragm air pump has a 7/32" inlet. This bad boy is rated between 6-12 VDC with 12 VDC being nominal voltage , draws 1.3 amps at 12 VDC.  Overall size is  4" x 1-5/8" x 3" with solder tabs but some may...

This torquey take-out 6-24VDC (12VDC nominal) motor draws approx 250mA no load, stalls at 7.2A and spins approx 5700 rpm. Measures 2" x 1-13/32" with a 3/4" x 1/8" flattened shaft and may have a setscrew-mounted coupler that resembles a router bit. Has...

Attention robotics boffins: Here's a nice, powerful 6-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty. Has a...