Magnets

The 5/32” bore in the center of this small plated neodymium magnet just makes it easier to mount. Measures 3/4" dia x 1/4" thick with a pull of approx 7 lbs. Works great with #6 or #8 flat head screws.

Although they work best next to steel. You’ll get a whole bunch (that’s 25) of ceramic magnets at 3/4” dia and either 1/4” thick or 3/16” thick. Some packs might have a center bore approx 1/4”, and some might be solid...

Pair of alnico bar magnets, each 7/16" x 1/4" x 3". Magnetized end to end with the North pole marked, the North end painted red and the South pole painted blue. Come with a pair of keepers and a wood separator bar.

Beats us, frankly, but this black plastic cover, 1-3/4” x 1-1/2” x 1/4” (not unlike a tiny toilet seat cover) is hiding a really nice 1” dia x 1/8” (think: quarter size) plated neodymium magnet, with at least a 8-lb pull,...

Looking for a very, very, very long refrigerator magnet? At 15 ft, this 3/8" wide x 1/16" thick magnetic strip should just about go up one side, across the top, and down the other side. It's flexible, but can be broken if bent back against itself --...

Ceramic magnets, 15/16" dia x 3/16" thick. One side has a 5/16" sq that goes through to a steel plate is octagonal, 9/16" across with a 3/16" dia hole in the center. The plate allows flexible mounting of the 3/4 lb lift magnet. The other interesting...

Put 'em on a sheet of paper (or glass, or plastic, or any number of things), put a magnet underneath, and watch them do what iron filings do when they meet a magnet. Weird fun coupled with basic physics. Our each is 3/8 oz, which...

Our very first pink camo sheet magnets. (Pink camo was originally made to hide things in butcher shops, but it didn’t sell well.) You’ll get (3) sheets at 12" x 9" in fridge-magnet thickness and strength which translates to intended for...