Line Connector
Mennekes Line Connector 200-250VAC
- ITM#
Buy more and save!
| $6.53 | each when you buy 3 - 12 |
| $6.00 | each when you buy 13 or more |
Description
Line Connector
This heavy-duty plastic line connector from Mennekes® has a boot and is rated for 32A at 200-250VAC. It's 2-phase with a ground lug through set-screw terminals (ID just under 5mm). The (2) AC plugs are 6mm dia and the ground plug below it is 8mm. Adjustable. 19mm wide strain relief 52mm up from the terminal plate. Made in Germany. UL. Sorry, no mating connector.
Related Products
Related Products
5/8" IN-LINE TUBING CONNECTOR PKG(10)
This connector is 3-3/8" of straight "in-line" plastic with 5/8" ridges only and a 13/32" I.D. It has a separator rib around its mid-section.
$2.95
10A 250VAC 128DEG CELCIUS THERMAL FUSE PKG(5)
Rated for 10A at 250VAC, these normally closed thermal fuses will pop at 128ºC or 262ºF. The fuses themselves are 1/2" long but yours will be wired into leads of assorted lengths, because they were...
$2.95
9-PIN MOLEX CONNECTOR PKG(2)
Good for detectives, and equally handy on this 9-pin Molex connector with (8) leads breaking out into (3) different pairs of leads with (2) offset and (1) regular Molex connector, plus (2) wires left...
$2.75
MODULATOR 3-pin connector, RCA plug
Good things come in little packages. In this case the package is a 1-1/4" x 1-1/4" x 1/2" modulator, and the good things are a circuit board with at least a trimpot, electrolytic capacitor, assorted...
$1.00
CONNECTOR, 3/16" BRASS TUBING ELBOW PKG(4)
You pick from our supply of brass connectors for 3/16” ID lab tubing. Connectors themselves have 1/8” IDs. We have elbow connectors and union (straight) connectors.
Starting at $3.95