Electronicals
- Communications & Electronics
- Lamps, Sockets & Wiring
- Motors, Blowers & Pumps
- Switches
- Batteries & Power
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
12-24VDC GEAR MOTOR W/PULLEY
Attention robotics boffins: Here's a nice, powerful 6-24VDC Mabuchi brush motor with a gearbox and pulley attached. At its nominal 24DC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty. Has a...$14.75$14.75Qty in Cart: 0Quantity:Price:$14.75Subtotal: -
ELECTRONICS BREADBOARD, 6-1/2" X 2-1/8", 128 BUSS
You Say Breadboard… The manufacturer, Elenco Electronics, says Bredblox, but what's in a name? This is just a nice little breadboard for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16"...Starting at $10.75Starting at $10.75 -
IN5408 RECTIFIER DIODE TWO LEAD PKG(10)
Wasn’t "" the name of Def Leppard’s third live album? Anyway, we have great IN5408 rectifier diodes here, and we’ll send you (10) of them. Use them for their intended purpose of converting alternating current to direct current...$3.50$3.50Qty in Cart: 0Quantity:Price:$3.50Subtotal: -
USB 2.0 BARREL JACK CORD PKG(3)
We haven’t seen ol’ “Barrel Jack” for years, and if you ask us, we’re better off for it. But we were thrilled when a shipment of these USB 2.0 to 1/8" barrel jack cords came in. You know barrel jacks—the kind that...$2.94$2.94Qty in Cart: 0Quantity:Price:$2.94Subtotal: -
1/16" DIAMETER STEEL BALING WIRE PKG(8)
Hay! You need wire? Surely you have something you could bale with all of this 1/16” dia steel baling wire. You’ll get (8) 36” lengths of it. Toss it in the trunk when you need to reattach something to the car that duck tape won’t...$3.95$3.95Qty in Cart: 0Quantity:Price:$3.95Subtotal: -
0.1UF 250V CAPACITORS PKG(4)
These 0.1uF ceramic capacitors have potted radial leads of stranded wire and are rated for up to 250V. Measuring 1-1/2" x 1/2", these are older-type capacitors and are probably more for point-to-point wiring, not PCB mounting.$3.25$3.25Qty in Cart: 0Quantity:Price:$3.25Subtotal: -
300V TERMINAL BLOCKS PKG(10)
Our 2-position terminal block is rated for 300V and measures 3/4" x 5/8" x 5/8" tall with set-screw terminals and a 3.6mm ID. 300V max rating. CSA.$3.25$3.25Qty in Cart: 0Quantity:Price:$3.25Subtotal: -
DEFOND 3A-6A MICROSWITCH N/O / N/C PKG(300)
This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.$29.95$29.95Qty in Cart: 0Quantity:Price:$29.95Subtotal: -
SPDT MOMENTARY ROCKER SWITCH PKG(4)
These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA. On-Off-On.$3.40$3.40Qty in Cart: 0Quantity:Price:$3.40Subtotal: -
SOCKET, CANDELABRA BASE 125V 70W PKG(8)
Classic candelabra socket for LED and incandescent bulbs. Has two spade terminals in the bottom, and spring snap holders on the sides.$3.50$3.50Qty in Cart: 0Quantity:Price:$3.50Subtotal: -
CANDELABRA BULB 6-SOCKET SET PKG(6)
Why curse the darkness when you can light these 120V 30W candelabra bulbs in the electric candelabra you build. Which you can do because each bulb comes in a matching socket, dark brown, 1-1/8" tall x 13/16" dia with steel wings to compress it into a...$4.75$4.75Qty in Cart: 0Quantity:Price:$4.75Subtotal: -
MOMENTARY ROCKER SWITCH PKG(4)
This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.$3.25$3.25Qty in Cart: 0Quantity:Price:$3.25Subtotal: -
THERM-O-DISK THERMAL CUT-OFF PKG(3)
From Therm-O-Disc, this thermal cut-off switch is N/C (normally closed) by definition. (Thermal cut-offs are what keep your coffeepot from burning your house down.) This one shuts down between 221°F (105°C) and 248°F (120°C) and...$2.95$2.95Qty in Cart: 0Quantity:Price:$2.95Subtotal: -
DEFOND MOMENTARY 3A-6A MICROSWITCH PKG(5)
This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x...Starting at $3.25Starting at $3.25 -
ASSORTED LIQUID CRYSTAL DISPLAYS PKG(5)
These liquid crystal displays are raring to go. As soon as we can get Mary Ann to stop playing with them we'll pick out (5) assorted displays for you. (She keeps zapping them with static electricity to see what pops up. Mary Ann is easily amused.) Sizes...$2.50$2.50Qty in Cart: 0Quantity:Price:$2.50Subtotal: -
POWER RESISTOR, 1.2K OHM PKG(3)
With this 1.2K OHM 10% tolerance power resistor. Rated 3 to 5 watts, it has a ceramic block body 3/8" sq x 1-1/2" long with wire leads on ends, one of which is 1/2" long and the other 1-1/2". Any questions?$1.95$1.95Qty in Cart: 0Quantity:Price:$1.95Subtotal: -
T1-3/4 LENS-END E5.5 SCREWBASE 2.5V BULB PKG(15)
Itty bitty Edison style 1/4 Watt lamp with a 3/16"/5mm screw base. (type E5 or E5.5) 1/2" long overall it needs 160ma @ 2.5 V. It has a clear glass envelope that collimates the light at the end for greater intensity when viewed end on. Typically priced...$3.25$3.25Qty in Cart: 0Quantity:Price:$3.25Subtotal: -
(4) 11-FT HANKS OF POLARIZED 18-2 WIRE PKG(4)
Don't wait or it'll all be gone. You get (4) pieces, 11 feet each, of 18-2 wire, polarized, black with a white stripe and eminently discardable spade-push terminals on both ends. (That's under a nickel a foot, cowboy.) Lamp cord, speaker wire, pretty...$2.50$2.50Qty in Cart: 0Quantity:Price:$2.50Subtotal: -
10K OHM THERMISTOR MOUNTED
This dipped, nominally 10K Ohm thermistor is on a heatshrunk and tubed 27” lead with a 6mm 2-pin Molex connector. Resistance drops as heat increases (NTC). AC takeout.$3.95$3.95Qty in Cart: 0Quantity:Price:$3.95Subtotal: -
115VAC BLADE AND SQUIRREL-CAGE FAN
This takeout fan from an un-used AC unit draws 42W at 115VAC and spins both a 12” dia, 5-blade fan blade and a 7-1/2” x 2-3/8” squirrel cage at approx 900 rpm. The motor in the middle measures 3-3/4” dia x 3-1/2” with a...$19.50$19.50Qty in Cart: 0Quantity:Price:$19.50Subtotal: -
10K OHM WIRED THERMISTOR
And hey there, missus, too. This wired thermistor is a take-out from unused humidifier equipment. Has 10K Ohm resistance, which goes down as the temp goes up. Includes leads, length will vary, and measures 1-3/16” long x 1/4” dia thermistor.$3.95$3.95Qty in Cart: 0Quantity:Price:$3.95Subtotal: -
12VDC MICRO SOLENOIDS
We find ourselves in possession of a bunch of 10- microsolenoid switches from the Lee Company. They’re rated for 12VDC and 5 psid, probably between 250-500mA, mounted in a 2-1/2” x 2” x 7/8” metal block with a 1/16” inlet...$24.50$24.50Qty in Cart: 0Quantity:Price:$24.50Subtotal: -
32VDC WARM WHITE COB LED LIGHT
This warm white COB LED light is awfully cute at 3/8" but don’t let the cuteness fool you--it’s insanely bright. It’s also deeply discounted (normally $10). Mounted on a 3/4” wide 6-leg pinwheel-shaped PC board, it draws 1.3A at...$3.75$3.75Qty in Cart: 0Quantity:Price:$3.75Subtotal: -
120V DUAL SLIDE DIMMER
Call us dim bulbs and we won’t argue. We’ll just let you pick from our selection of dimmers. All of them are made for standard electrical boxes, and you'll need 1-3/8” back clearance. All are good with incandescents but not CFLs, and...Starting at $4.50Starting at $4.50 -
WARM WHITE 3W E-14 EURO BASE LED
Fancy up your lighting with these flame-shaped LED bulbs. Base is E-14 European-Edison size, and they have a diamond-shaped faux-filiament and vertical cooling slots in copper-colored aluminum around the bottom half. You pick the warm-white 3W (40W...Starting at $1.95Starting at $1.95 -
COB LED TAKEOUT LIGHT FIXTURE
This light fixture takeout has (8) 1/16” dia surface-mounted COB LEDs on a 1-7/8” dia circuit board/heat sink. Nominally rated for 1A at 32VDC via a 4mm ID 2-pin Molex connector. Most will have a 3/8” square clear lens over the elements...$2.85$2.85Qty in Cart: 0Quantity:Price:$2.85Subtotal: -
COB LED ALUMINUM WALL SCONCE
Our uber-slick, modern wall sconce is a COB LED that draws just 1W and throws white light up and down from a 3” long x 2-3/8” square hunk of brushed aluminum that’s open on the ends. (Yes, could be mounted to light to the sides, and...$2.85$2.85Qty in Cart: 0Quantity:Price:$2.85Subtotal: -
WHITE LIGHT LED ACCENT LIGHT FIXTURE
These unusual, yet semi-awesome, accent light fixtures are brushed aluminum cans, 2-3/4” tall x 2-1/8” dia, and emit white light from an internal LED. Have a pair of 5/32” mounting holes on a removable back plate and (44) 5/16”...$2.85$2.85Qty in Cart: 0Quantity:Price:$2.85Subtotal: -
11VAC 3W CCW TIMING MOTOR
These small timing motors draw 3W and are just under 2" dia x approx 3/4" thick with mounting wings that have (3) 1/8" holes. You pick: the 11VAC motor that spins 1 rpm CCW with a 3/4" long shaft with an attached 3/4" dia x 1/4"...Starting at $3.50Starting at $3.50 -
2-PACK HEADLIGHT SOCKETS 787110
From NAPA, packages of (2) high-temperature headlight sockets. You pick: #787110, 9006 2-wire, 1-1/8" wide x 5/8" x 1-1/4" deep with (2) 5" leads or #787138, 9005 2-wire, 1-1/16" wide x 5/8" x 1-5/16" deep with (2) 6" leads.Starting at $2.75Starting at $2.75 -
MARINE PUBLIC ADDRESS SYSTEM PARTS
This little package of take-out parts is from a marine public address system, but you don't really have to be on the water to use it. You'll get a 15K-Ohm handset mic (1/4" out) with an 11-foot cord partially coiled, an in-line level control with a...$3.50$3.50Qty in Cart: 0Quantity:Price:$3.50Subtotal: -
3-PHASE BRUSHLESS SERVO MOTOR
This NOS 12VDC 1A 3-coil brushless servo motor with 36 steps per revolution was for a printer, maybe. Or a scanner, maybe. Whichever, it's mounted on a 2-1/2" x 2" plate with a 3/4" long shaft with a 5/8" dia rubber wheel out one side and a 15-tooth, 2"...$2.75$2.75Qty in Cart: 0Quantity:Price:$2.75Subtotal: -
FAN BLADE, 4", 4-BLADE, BLACK PLASTIC 3/16"
And even more fan blades. Black-plastic 4-bladed impeller, each measuring approx 4" across with a 3/16" bore. Designed for clockwise rotation. No motor. Just blades. (But nice little blades.)Starting at $1.25Starting at $1.25 -
STANDARD TELEPHONE CORD WITH INTERFERENCE FILTER
This 7-foot length of standard 4-wire gray telephone cord has a modular plug on each end and an in-line 1-1/2" x 1" dia interference blocking RF filter at one end. 'Nuff said.$1.25$1.25Qty in Cart: 0Quantity:Price:$1.25Subtotal: -
ADAPTER, 7.5VDC / 600mA / 5.5mm FEM CENTER POS.
There is an entire class of transformers that surplus dealers call "AC Adapters." What we really mean is transformers or wall warts that plug directly into the wall (primary voltage 110 VAC), and via a cord and/or plug provide various levels of output...Starting at $3.25Starting at $3.25