Tools and Hardware
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
34-PIECE TAMPER-PROOF BIT SET
This 34-piece set of chrome vanadium bits includes 1/4" hex bits with (8) security Torx from T8 to T40; (3) Pozi from PZ1 to PZ3; (2) Phillips at PH1 & PH2; (6) security Hex from H2 to H6; (4) Tri-wing from Y1 to Y4; (4) spanner head from U4 to U10; (3)...$14.95$14.95 -
180-DEGREE FLEXIBLE EXTENSION DRIVER SHAFT
Sometimes you need to screw around corners, and we feel your pain. Try this flexible extension shaft for your drill or driver. Accepts 1/4” hex bits. Measures 11-3/4” long over all with a flexible portion that’s 6-1/4” long and...$6.95$6.95 -
FIBER OPTIC LED BORE LIGHT
Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the...$5.35$5.35 -
3-WAY STOPCOCK VALVE PKG(5)
A Gamecock is a bird, and a fine one at that, but we don’t have any of those. We do have (2) kinds of stopcocks, though. They’re valves used to control the flow of liquids or gasses, fluids—stuff like that...Starting at $3.95Starting at $3.95 -
RARE EARTH N52 NEODYMIUM BLOCK 1" X 1/2" x 1/2"
N52 1 in x 1/2 in x 1/2 in Neodymium Block Rare earth magnets are the world's strongest magnets. All magnets are not created equal! They even look pretty and have about a 40 LB lift on flat surfaces and are rated at 14000 gauss.$9.95$9.95 -
1-1/4" DIAMETER 90-LB PULL N42 NEODYMIUM MAGNET
Like your cousin the state senator, this N42 neodymium magnet has a lot of pull—an estimated 90 lbs on flat steel surfaces. Ideal for holding, hanging and retrieving objects. Measures approx 1-1/4” dia x 1/4” thick with an M6 eyebolt...$9.50$9.50 -
4-1/4" POLISHED STEEL JEWELER'S ANVIL
The Anvil Chorus would have been much quieter. Play your own chorus on this excellent forged jeweler's anvil, which is much smaller than the ones in cartoons. In heavy polished steel, it measures approx 4-1/4” x 1-3/4” x 1-1/8” with a...$23.50$23.50 -
ANSI-RATED QUALITY SAFETY GOGGLES PKG(100)
Safety is as safety does these days, and we recommend these high-quality, safety goggles, unvented for maximum splatter protection and ANSI Z87.1-rated. Measure 6” wide x 3-5/8” tall x 3-1/8” deep. The black elastic strap is adjustable,...$250.00$250.00 -
4" 2-PIECE MINI PLIERS SETS
Pick a pair of mini pliers, each set small enough to tuck into your pocket without causing a limp. You pick: the regular pliers pair has one standard pliers with grooved jaws and one slip-joint pliers, the ones we can't use the...Starting at $8.50Starting at $8.50 -
GRIP TOOLS ULTIMATE HEX WRENCH SET WITH CASE
Here’s a passel and a half of hex wrenches, and they come in a 14” x 10-1/2” plastic organizer. You’ll get a total of (36) wrenches in every size you’ll need, from 1/16” to 3/8” and 1.5mm to 10mm in both short...$29.95$29.95 -
SALE
TITANIUM NITRIDE-COATED TAP & DIE SET
Could be what you do if you’re buried alive, or if you want to dance your life away, but most likely it’s a description of the machinist’s friend. This tap & die set cuts straight, clean threads and includes a 1/8” to...$17.95$19.9510% OFF$17.95$19.9510% OFF -
SALE
GOOSENECK HELPING HAND WITH LEDS AND MAGNIFIER
Who among us couldn’t, really? This helping hand has dual white LEDs under a 2-3/8" dia 2.75X lens with a 5/8" dia 7.5X window on a 6-1/2” long gooseneck. Below the lens is a 4-1/2" rod with alligator clips on ball/socket joints at each end...$14.00$15.9512% OFF$14.00$15.9512% OFF -
SILVER SOLDER IN A NICE PLASTIC DISPENSER
Sometimes you don’t want lead in your solder. You know this. Our each is a dispenser that feeds approx 109” of Tin/Silver solder in 0.04” dia wire. Solder is 96% tin and 4% silver. No need to thank us for refraining from lead soldier...$4.95$4.95 -
SALE
ENCASED NEODYMIUM MAGNET PKG(2)
Beats us, frankly, but this black plastic cover, 1-3/4” x 1-1/2” x 1/4” (not unlike a tiny toilet seat cover) is hiding a really nice 1” dia x 1/8” (think: quarter size) plated neodymium magnet, with at least a 8-lb pull,...$2.98$5.9550% OFF$2.98$5.9550% OFF -
PLASTIC-ENCASED RARE EARTH MAGNETS PKG(3)
It’s a scientific breakthrough! Oh, wait, no, it’s a rare-earth magnet encased in white plastic. Great for holding notes on your white refrigerator without clashing. Measures 1-1/4” x 3/8” x 5/16” and also has a piece of...$3.95$3.95 -
BEARING, 23mm X 8mm X 14mm Sealed PKG(3)
Bring these bearings to bear on your next project. Our supply and variety is constantly rolling over so get ‘em while we got ‘em!. Click on the bearing name to see a large photo of your favorite.Starting at $3.95Starting at $3.95 -
HOOK, PEGBOARD, 3-1/2" 6PK PKG(6)
These standard pegboard hooks fit, wait for it, standard pegboards, with 1” spacing on the legs, and made of 7/32” steel. Not really hooks, these are the long straight thingies with a slight upward angle to approx the...Starting at $3.50Starting at $3.50 -
WHITE SILICONE BELTS 4" X 3/32" PKG(25)
These translucent silicone O-rings are 3/32" thick and measure 4" dia. Nice belts for science-project motors and even nicer for our slingshot needs. Crafters will see jewelry material that the metal-detectors won't care about.$4.95$4.95 -
5" LONG HEMOSTAT FORCEPS PKG(3)
Whatever you call them they are super handy. Used for suturing, these are carbon-steel straight-locking needle holders, 5” long with narrow serrated 7/16” tips. And yes, you’re permitted to use them for other stuff if you’re not a...$4.95$4.95 -
5/8" X 6" GLUE / ACID BRISTLE BRUSH PKG(6)
You don’t, huh? They’re called acid brushes because once upon a plumber they were used to apply acid flux to pipes for soldering. Now they’re just the cheap, disposable brushes with hollow aluminum handles you see in glue pots and...$2.95$2.95 -
4-PIECE TWEEZER SET STAINLESS STEEL
And then give us a little tweeze, and a couple more for luck. Our 4-piece stainless steel tweezer set includes: 4-5/8" long bent tweezers; 4-1/2” fine point; 4-5/8” cross-locks; and 4-1/4” blunt-tip stamp tweezers with 1/4” wide...$4.25$4.25 -
NEODYMIUM MAGNETIC BAR 1-1/2" X 1/2" X 1/8"
This plated N52 14,200 gauss neodymium magnet is shaped like a miniature silver ingot, measuring 1-1/2" long x 1/2" wide x 1/8" thick. Has a big hangonability quotient, which the manufacturer claims is 15 lbs of pull, meaning it's probably closer to 13...$4.85$4.85 -
1-1/16" LONG 24 TOOTH PULLEY PKG(3)
This small 24-tooth pulley is 1-1/16" long with 5/16" of that being a 5/8" dia shaft with a 1/2" x 3/8" flattened bore. The pulley portion is 1" OD x 7/8" ID. In shiny silver aluminum.$3.95$3.95 -
1-1/16" DIAMETER 32 TOOTH GEAR PKG(4)
This 32-tooth gear is 1-1/16" dia, 32 pitch and 20-degree pressure angle. Measures 3/32" thick on its face with a 1/4" bore and a 15/32" dia x 17/32" long 13-tooth shaft with the same pitch/pressureStarting at $2.95Starting at $2.95 -
2" PAIR STEEL HINGES W/TWO HOLE PKG(2)
Your ordinary generic everyday plain old steel hinge measures 2" long x 1-1/2" wide when open with a 1/8" axle and mounting holes just a hair under 1/4". Comes with screws, as they will. Ordinary, yes, but necessary.$3.95$3.95 -
SALE
ASSORTED COLORED ELECTRICAL TAPE PKG(3)
We don't normally like electrical surprises, but in this case it's a just a color. Our vinyl electrical tape is 3/4" wide on a 66-foot roll and we'll send you (3) rolls from our lovely selection of purple, red, green, brown, gray and boring black. It...$2.75$3.7527% OFF$2.75$3.7527% OFF -
STAINLESS STEEL SURGICAL SCISSOR PKG(3)
You get (3) of these stainless steel surgical scissors, which have a shorter working length (with the hinge closer to the jaws) than regular snippers, but you still shouldn't try to remove your own appendix. Measure 4-3/8" long and are quite sharp.$5.75$5.75 -
LOOP-END TWEEZERS PLASTIC 4-7/8" PKG(8)
We made up the name. These plastic tweezers have lightly serrated open loops in a teardrop shape, 9/16" x 3/8", on the grabbing end. Might be tissue tweezers for a lab, but we like them for gripping beads, eggs (to color), electronic parts, sushi,...$3.60$3.60 -
UNCOATED CERAMIC MAGNETS 1-1/4" X 3/8" PKG(29)
Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.$8.85$8.85 -
4" RUBBER TIPPED SPRING CLAMPS PKG(4)
Devices used to hold spring in place, thus ensuring eternally promis-ing, but changeable and wet weather. No? How about this then: Steel grips, spring loaded to keep their tips tightly closed on whatever you chose to target. The handles and tips have...$4.60$4.60 -
SALE
STRAIGHT PLASTIC TWEEZERS 5" PKG(8)
Try plastic tweezers. Joke. But you do need this pack of eight (8) pair of 5" long blue-plastic tweezers, with serrated jaws and 1/16" wide tips, for electronics applications (no fear of magnetization). They're safer for kids' crafts classes and school...Starting at $2.45$3.60Starting at $2.45$3.60 -
3/8" RUBBERIZED STRIP MAGNET FOOT PKG(15)
Looking for a very, very, very long refrigerator magnet? At 15 ft, this 3/8" wide x 1/16" thick magnetic strip should just about go up one side, across the top, and down the other side. It's flexible, but can be broken if bent back against itself --...$3.25$3.25 -
CERAMIC MAGNET W/INSERT PKG(10)
Ceramic magnets, 15/16" dia x 3/16" thick. One side has a 5/16" sq that goes through to a steel plate is octagonal, 9/16" across with a 3/16" dia hole in the center. The plate allows flexible mounting of the 3/4 lb lift magnet. The other interesting...$1.95$1.95 -
3-LB CERAMIC MAGNET PKG(2)
Ferrite ceramic magnets can be quite powerful and have excellent resistance to demagnetization. These rectangular ones are no exception. Add the power of surplus and we'll give you a bunch of these mighty-mites at an uber-bargain price. Measures 1-7/8" x...$3.25$3.25 -
ROUNDED BLADE SCALPEL, BLADE #10 PKG(3)
Just because hospitals toss 'em after one use doesn't mean you should. These are sterile scalpels, and they're ultra-handy in the shop or craft room. Measure 6" long with snap-off blade shields. You pick #10 with a rounded profile or #11 with pointed...Starting at $3.50Starting at $3.50 -
4-WAY UNIVERSAL DRILL CHUCK KEYS
How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and...$3.95$3.95 -
6" MAGNETIC STAINLESS STEEL DISH
Hang on to your widgets, screws, bolts, pins and assorted teeny tinies while you're taking things apart. This indispensable 6" dia x 1-1/8" deep magnetic stainless steel dish from Omaha Tools holds all those parts and saves you from crawling around on...$5.95$5.95 -
TOLSEN TOOLS BENCH WOOD PLANE #3
There are plain ol’ planes and there’s the 42000 Plane from Tolsen Tools. This hand-held, steel-bodied wood plane has a carefully sharpened, adjustable blade that can be used for smoothing and removing soft or hard wood. Also has an anti-slip...$12.95$12.95 -
6 ASSORTED DIAMOND-COATED CARBON-STEEL BITS
Each of the (6) diamond-coated carbon-steel bits in this set has a 1/8” shank for use in rotary tools. All of them are 1-3/4” long and include: a ball, cylinder, two sizes of cones, a spindle, and a point.$4.85$4.85 -
FOLDING STEEL CAMPING SAW
See saw, buy saw. Then go on a camping trip and saw some firewood so you don’t freeze your tuchas off in the woods. This folding steel crosscut saw opens to 10-1/2" long with a 5” blade, but folds to a tote-able 6-1/4” long. Has an...$7.35$7.35