Electronicals
- Communications & Electronics
- Lamps, Sockets & Wiring
- Motors, Blowers & Pumps
- One-of-a-kind Electronics
- Switches
- Batteries & Power
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
300V TERMINAL BLOCKS PKG(10)
Our 2-position terminal block is rated for 300V and measures 3/4" x 5/8" x 5/8" tall with set-screw terminals and a 3.6mm ID. 300V max rating. CSA.$3.25$3.25 -
DEFOND 3A-6A MICROSWITCH N/O / N/C PKG(300)
This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x 1/4" with a 5/8" bat. UL.$29.95$29.95 -
NEMA 10-20 RECEPTACLE PKG(3)
Time was, these NEMA 10-20 female receptacles were standard for large air conditioners, and if you need one, we've got 'em. These are Hubbell brand, 3-screw terminal type with a pair of mounting holes on the sides. Rated for 10A at 250V and 15A at 125V.$3.95$3.95 -
ANTENNA, PASSIVE CAR PHONE, 23-1/2" PKG(2)
Once up on a time, when giants stalked the earth and there was no night baseball in Wrigley Field, car phones were the cuttingest-edgiest technology on the planet. Guess who has the antennas. These are passive antennas, 23-1/2" long x 1/16" dia on 1" dia...$3.95$3.95 -
SPDT MOMENTARY ROCKER SWITCH PKG(4)
These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA. On-Off-On.$3.40$3.40 -
SOCKET, CANDELABRA BASE 125V 70W PKG(8)
Classic candelabra socket for LED and incandescent bulbs. Has two spade terminals in the bottom, and spring snap holders on the sides.$3.50$3.50 -
15A PANEL-MOUNT PLUG WITH 2" DIA FACE PKG(5)
This is a panel-mount 3-prong grounded electrical plug rated for 15A at 125V, and we're thinking compressor applications. Has a 2" dia face with a 1-3/16" sq x 7/8" housing behind it, quick disconnect terminals and a ground screw, plus a pair of 2-3/4"...$3.25$3.25 -
CANDELABRA BULB 6-SOCKET SET PKG(6)
Why curse the darkness when you can light these 120V 30W candelabra bulbs in the electric candelabra you build. Which you can do because each bulb comes in a matching socket, dark brown, 1-1/8" tall x 13/16" dia with steel wings to compress it into a...$4.75$4.75 -
MOMENTARY ROCKER SWITCH PKG(4)
This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.$3.25$3.25 -
THERM-O-DISK THERMAL CUT-OFF PKG(3)
From Therm-O-Disc, this thermal cut-off switch is N/C (normally closed) by definition. (Thermal cut-offs are what keep your coffeepot from burning your house down.) This one shuts down between 221°F (105°C) and 248°F (120°C) and...$2.95$2.95 -
10A 250VAC 128DEG CELCIUS THERMAL FUSE PKG(5)
Rated for 10A at 250VAC, these normally closed thermal fuses will pop at 128ºC or 262ºF. The fuses themselves are 1/2" long but yours will be wired into leads of assorted lengths, because they were betooken out of coffeemakers of some sort...$2.95$2.95 -
DEFOND MOMENTARY 3A-6A MICROSWITCH PKG(5)
This little (although we suppose that goes without saying) microswitch from Defond is rated for up to 6A at 125VAC or 3A at 250VAC, 1/3HP. The like-new takeout has both N/O and N/C contacts. Measures just under 13/16" x 7/16" x...Starting at $3.25Starting at $3.25 -
ASSORTED LIQUID CRYSTAL DISPLAYS PKG(5)
These liquid crystal displays are raring to go. As soon as we can get Mary Ann to stop playing with them we'll pick out (5) assorted displays for you. (She keeps zapping them with static electricity to see what pops up. Mary Ann is easily amused.) Sizes...$2.50$2.50 -
POWER RESISTOR, 1.2K OHM PKG(3)
With this 1.2K OHM 10% tolerance power resistor. Rated 3 to 5 watts, it has a ceramic block body 3/8" sq x 1-1/2" long with wire leads on ends, one of which is 1/2" long and the other 1-1/2". Any questions?$1.95$1.95 -
T1-3/4 LENS-END E5.5 SCREWBASE 2.5V BULB PKG(15)
Itty bitty Edison style 1/4 Watt lamp with a 3/16"/5mm screw base. (type E5 or E5.5) 1/2" long overall it needs 160ma @ 2.5 V. It has a clear glass envelope that collimates the light at the end for greater intensity when viewed end on. Typically priced...$3.25$3.25 -
(4) 11-FT HANKS OF POLARIZED 18-2 WIRE PKG(4)
Don't wait or it'll all be gone. You get (4) pieces, 11 feet each, of 18-2 wire, polarized, black with a white stripe and eminently discardable spade-push terminals on both ends. (That's under a nickel a foot, cowboy.) Lamp cord, speaker wire, pretty...$2.50$2.50 -
ELECTRONIC SWITCH ASSORTMENT ALL TYPES PKG(10)
Perhaps a switch in time won't save nine, but if you keep getting caught without the goods, and have to rush off to the local high priced supplier, we can help. Of our assortment of (10) switches, (at least (5) different) should have the answer to a...$5.95$5.95 -
SQUIRREL CAGE BLOWER MOTOR ASSEMBLIES 120VAC
When you need a little gust, or maybe even a big gust, we have the blower for you. 115VAC squirrel cage blower motor assembly. It's 7-1/2" in diameter x 3" cage and 4-1/4" deep overall. These are takeouts from an air conditioner unit but in great shape...$12.50$12.50 -
700W DUAL-SLIDE DIMMER SWITCH
Nice dual-slide dimmer switch, rated for up 700W and with precise adjustment for full-range lighting levels. In white plastic and with an integrated 4-3/4” x 3” wall plate. Because of the tabs and slide channels below, the whimsical among us...$2.75$2.75 -
11 WATT DIMMABLE LED BULB
Spotlights! Get your spotlights! We have (3) kinds, all with white bodies and all with dimmable LEDs that will last about 25,000 hours, so if you plan on leaving the lights on and going on vacation for two years and nine months,...Starting at $3.75Starting at $3.75 -
10K OHM THERMISTOR MOUNTED
This dipped, nominally 10K Ohm thermistor is on a heatshrunk and tubed 27” lead with a 6mm 2-pin Molex connector. Resistance drops as heat increases (NTC). AC takeout.$3.95$3.95 -
115VAC BLADE AND SQUIRREL-CAGE FAN
This takeout fan from an un-used AC unit draws 42W at 115VAC and spins both a 12” dia, 5-blade fan blade and a 7-1/2” x 2-3/8” squirrel cage at approx 900 rpm. The motor in the middle measures 3-3/4” dia x 3-1/2” with a...$19.50$19.50 -
PC BOARD VOLTAGE LEVEL DISPLAY WITH LED LIGHTS
We’re unsure what this take-out was taken out of, but it’s a 2-1/4” x 1-3/4” PC board with comparator IC (integrated circuit), plus (1) yellow and (4) red LEDs, assorted resistors and a trim pot. Also, red and black leads with...$2.95$2.95 -
10K OHM WIRED THERMISTOR
And hey there, missus, too. This wired thermistor is a take-out from unused humidifier equipment. Has 10K Ohm resistance, which goes down as the temp goes up. Includes leads, length will vary, and measures 1-3/16” long x 1/4” dia thermistor.$3.95$3.95 -
12VDC MICRO SOLENOIDS
We find ourselves in possession of a bunch of 10- microsolenoid switches from the Lee Company. They’re rated for 12VDC and 5 psid, probably between 250-500mA, mounted in a 2-1/2” x 2” x 7/8” metal block with a 1/16” inlet...$24.50$24.50 -
32VDC WARM WHITE COB LED LIGHT
This warm white COB LED light is awfully cute at 3/8" but don’t let the cuteness fool you--it’s insanely bright. It’s also deeply discounted (normally $10). Mounted on a 3/4” wide 6-leg pinwheel-shaped PC board, it draws 1.3A at...$3.75$3.75 -
120V DUAL SLIDE DIMMER
Call us dim bulbs and we won’t argue. We’ll just let you pick from our selection of dimmers. All of them are made for standard electrical boxes, and you'll need 1-3/8” back clearance. All are good with incandescents but not CFLs, and...Starting at $4.50Starting at $4.50 -
WARM WHITE 3W E-14 EURO BASE LED
Fancy up your lighting with these flame-shaped LED bulbs. Base is E-14 European-Edison size, and they have a diamond-shaped faux-filiament and vertical cooling slots in copper-colored aluminum around the bottom half. You pick the warm-white 3W (40W...Starting at $1.95Starting at $1.95 -
COB LED TAKEOUT LIGHT FIXTURE
This light fixture takeout has (8) 1/16” dia surface-mounted COB LEDs on a 1-7/8” dia circuit board/heat sink. Nominally rated for 1A at 32VDC via a 4mm ID 2-pin Molex connector. Most will have a 3/8” square clear lens over the elements...$2.85$2.85 -
WHEEL, 6" DIA. X 2", 1-3/16" ID RUBBER COATED
Black Rubber Wheel 6" diameter, 2" wide with 1-3/16" hub. Load is 400 lbs. No bearing hub. Weighs 4 lbs.$3.75$3.75 -
COB LED ALUMINUM WALL SCONCE
Our uber-slick, modern wall sconce is a COB LED that draws just 1W and throws white light up and down from a 3” long x 2-3/8” square hunk of brushed aluminum that’s open on the ends. (Yes, could be mounted to light to the sides, and...$2.85$2.85 -
WHITE LIGHT LED ACCENT LIGHT FIXTURE
These unusual, yet semi-awesome, accent light fixtures are brushed aluminum cans, 2-3/4” tall x 2-1/8” dia, and emit white light from an internal LED. Have a pair of 5/32” mounting holes on a removable back plate and (44) 5/16”...$2.85$2.85 -
9VDC STEPPER MOTOR 500MA 3/8-20 SHAFT
This bipolar, 2-phase stepper motor from Shinano Kenshi Corp (SKC) draws 500mA at 9VDC with a 0.9 deg./step. Coils are brown/orange and red/yellow. Measures 1-7/16" dia x 1/2" with a 4" long, 3/8" threaded shaft, and mounting wings with 1/8" holes.$7.50$7.50 -
11VAC 3W CCW TIMING MOTOR
These small timing motors draw 3W and are just under 2" dia x approx 3/4" thick with mounting wings that have (3) 1/8" holes. You pick: the 11VAC motor that spins 1 rpm CCW with a 3/4" long shaft with an attached 3/4" dia x 1/4"...Starting at $3.50Starting at $3.50 -
NOKIA EARPHONE SET WITH PIVOTING MIC
This padded earpiece has a 46" cord, nice little padded ear gripper to keep it from falling out, an extra ear pad, an inline answer switch and a pivoting microphone like all the football coaches wear. Made for Nokia, it has a non-standard 3mm TRRS Nokia...$3.95$3.95 -
16A IN-LINE EMI POWER FILTER
Our inline filter helps rid your AC line of EMI and spikes. Rated for up to 16A at 250VAC. Has quick-disconnect terminals for the line and lead sides. Schematic is on the 1-1/2" x 1-3/8" x 1-5/8" housing.$3.50$3.50 -
MENNEKES LINE CONNECTOR 200-250VAC
This heavy-duty plastic line connector from Mennekes® has a boot and is rated for 32A at 200-250VAC. It's 2-phase with a ground lug through set-screw terminals (ID just under 5mm). The (2) AC plugs are 6mm dia and the ground plug below it is 8mm...$7.50$7.50 -
2-PACK HEADLIGHT SOCKETS 787110
From NAPA, packages of (2) high-temperature headlight sockets. You pick: #787110, 9006 2-wire, 1-1/8" wide x 5/8" x 1-1/4" deep with (2) 5" leads or #787138, 9005 2-wire, 1-1/16" wide x 5/8" x 1-5/16" deep with (2) 6" leads.Starting at $2.75Starting at $2.75 -
MARINE PUBLIC ADDRESS SYSTEM PARTS
This little package of take-out parts is from a marine public address system, but you don't really have to be on the water to use it. You'll get a 15K-Ohm handset mic (1/4" out) with an 11-foot cord partially coiled, an in-line level control with a...$3.50$3.50 -
SALE
SCHAFFNER 3AMP EMI FILTER
This chassis-mounted in-line EMI filter from Schaffner (model #FN2020-3-06) accepts up to 3A at 110/250VAC. Unit measures 1-3/4" x 1-5/16" x 1-3/16" with (2) 3/16" mounting holes on side wings. Has 1/4" quick-disconnect terminals and has a wiring diagram...$2.50$7.5067% OFF$2.50$7.5067% OFF